Yes, I would assume the control is in the switch which appears to come as a complete assembly for all four windows, Part No. DB4G-66-350 surely not assembled in-house, outsourced from some small electrical shop in the shadow of Mazda's Zoom-Zoom Stadium. Just over $220 retail, $160 online or $40 on eBay, from recycling yards.
In this Video we will Demonstrate How To Replace Mazda 2 Electric Window Switch in Under 20 Minutes. Mazda 2 Master Window Switch Available on our Website fo

1. Wiring/Fuses. Looking to see if your Town and Country blew a fuse is a great place to start. This is particularly true if the window does not seem to have been struggling before it failed to go up. If all of the windows don’t work, that is going to be a fuse or window relay that has gone bad. You’ll need to locate the fuse box, and then

2. Press and HOLD driver's front window switch until window is all the way down 3. Pull up and HOLD switch for THREE SECONDS after window is all the way up. You might hear a *beep* noise. 4. Repeat for passenger side window FROM PASSENGER SIDE SWITCH ON PASSENGER DOOR. 5. Send me $5 for my time and mad skillz.
The 4x-switch is quite expensive, 260EUR =( So, I make some new connection. The faulty electronic is only for front windows, so now I connect wires so that I can use front windows with read window switch. (Rear windows is still working by those 2xback window switch) which is located between seats. Here is the conncection, at one's own risk.
2007 Mazda 3 - all power windows stopped working, then the drivers window started working again. The other three still do not work. Have checked fuses, both are good. Have tried drivers door switch panel as well as each individual swith - no difference. HELP! . 96 399 130 398 361 314 106 38 121

mazda 3 window switch not working